periph_conf.h

Go to the documentation of this file.

/*
 * Copyright (C) 2021 Mesotic SAS
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef PERIPH_CONF_H
#define PERIPH_CONF_H
 
#include "periph_cpu.h"
 
#include "board.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
static const i2c_conf_t i2c_config[] = {
    {
        .dev = NRF_TWIM3_S,
        .scl = GPIO_PIN(0, 31),
        .sda = GPIO_PIN(0, 30),
        .speed = I2C_SPEED_NORMAL
    }
};
#define I2C_NUMOF           ARRAY_SIZE(i2c_config)
static const spi_conf_t spi_config[] = {
    {
        .dev  = NRF_SPIM2_S,
        .sclk = GPIO_PIN(0, 13),
        .mosi = GPIO_PIN(0, 11),
        .miso = GPIO_PIN(0, 12),
    }
};
 
#define SPI_NUMOF           ARRAY_SIZE(spi_config)
static const timer_conf_t timer_config[] = {
    {
        .dev      = NRF_TIMER0_S,
        /* using last channel for timer_read(), so only 5 of 6 channels available */
        .channels = 5,
        .bitmode  = TIMER_BITMODE_BITMODE_32Bit,
        .irqn     = TIMER0_IRQn
    },
    {
        .dev      = NRF_TIMER1_S,
        /* using last channel for timer_read(), so only 5 of 6 channels available */
        .channels = 5,
        .bitmode  = TIMER_BITMODE_BITMODE_08Bit,
        .irqn     = TIMER1_IRQn
    },
};
 
#define TIMER_0_ISR         isr_timer0 
#define TIMER_1_ISR         isr_timer1 
#define TIMER_0_MAX_VALUE 0xffffffff
#define TIMER_1_MAX_VALUE 0xffffffff
 
#define TIMER_NUMOF         ARRAY_SIZE(timer_config) 
static const uart_conf_t uart_config[] = {
    {
        .dev        = NRF_UARTE0_S,
        .rx_pin     = GPIO_PIN(0, 28),
        .tx_pin     = GPIO_PIN(0, 29),
#ifdef MODULE_PERIPH_UART_HW_FC
        .rts_pin    = GPIO_UNDEF,
        .cts_pin    = GPIO_UNDEF,
#endif
        .irqn       = UARTE0_SPIM0_SPIS0_TWIM0_TWIS0_IRQn,
    },
    {
        .dev        = NRF_UARTE1_S,
        .rx_pin     = GPIO_PIN(0, 0),
        .tx_pin     = GPIO_PIN(0, 1),
#ifdef MODULE_PERIPH_UART_HW_FC
        .rts_pin    = GPIO_UNDEF,
        .cts_pin    = GPIO_UNDEF,
#endif
        .irqn       = UARTE1_SPIM1_SPIS1_TWIM1_TWIS1_IRQn,
    },
};
 
#define UART_NUMOF          ARRAY_SIZE(uart_config) 
#ifndef RTT_DEV
#define RTT_DEV             (0)                 
#endif
 
#define RTT_MAX_VALUE       (0x00ffffff)         
#define RTT_MAX_FREQUENCY   (32768U)             
#define RTT_MIN_FREQUENCY   (8U)                 
#define RTT_CLOCK_FREQUENCY (32768U)             
#ifndef RTT_FREQUENCY
#define RTT_FREQUENCY       (1024U)              
#endif
static const pwm_conf_t pwm_config[] = {
    {
        .dev = NRF_PWM0_S,
        .pin = {
                    LED0_PIN,
                    LED1_PIN,
                    LED2_PIN,
                    LED3_PIN
               }
    },
};
 
#define PWM_NUMOF           ARRAY_SIZE(pwm_config)
#ifdef __cplusplus
}
#endif
 
#endif /* PERIPH_CONF_H */