Board specific definitions for the SLTB009A starter kit. More...

Detailed Description

Board specific definitions for the SLTB009A starter kit.

Author: Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de; Bas Stottelaar basst.nosp@m.otte.nosp@m.laar@.nosp@m.gmai.nosp@m.l.com

Definition in file board.h.

#include "cpu.h"
#include "periph_conf.h"
#include "periph/gpio.h"
#include "periph/spi.h"
#include "periph/timer.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

ztimer configuration
The timer runs at 1000 kHz to increase accuracy, or at 32.768 kHz if LETIMER is used.
#define	CONFIG_ZTIMER_USEC_DEV (TIMER_DEV(0))
	Timer peripheral for ztimer.

#define	CONFIG_ZTIMER_USEC_BASE_FREQ (1000000UL)
	Running at 1000 kHz.

#define	CONFIG_ZTIMER_USEC_WIDTH (32)
	Running on a 32-bit timer.

#define	CONFIG_ZTIMER_USEC_ADJUST_SET (10)
	Overhead for ztimer_set.

#define	CONFIG_ZTIMER_USEC_ADJUST_SLEEP (12)
	Overhead for ztimer_sleep.

VCOM interface enable pin definition
#define	VCOM_EN_PIN GPIO_PIN(PA, 15)

Push button pin definitions
#define	PB0_PIN GPIO_PIN(PD, 5)

#define	PB1_PIN GPIO_PIN(PD, 8)

LED pin definitions
#define	LED0R_PIN GPIO_PIN(PA, 12)

#define	LED0G_PIN GPIO_PIN(PA, 13)

#define	LED0B_PIN GPIO_PIN(PA, 14)

#define	LED1R_PIN GPIO_PIN(PD, 6)

#define	LED1G_PIN GPIO_PIN(PF, 12)

#define	LED1B_PIN GPIO_PIN(PE, 12)

#define	LED0_PIN LED0R_PIN

#define	LED1_PIN LED1R_PIN

Macros for controlling the on-board LEDs
#define	LED0_ON gpio_set(LED0_PIN)

#define	LED0_OFF gpio_clear(LED0_PIN)

#define	LED0_TOGGLE gpio_toggle(LED0_PIN)

#define	LED1_ON gpio_set(LED1_PIN)

#define	LED1_OFF gpio_clear(LED1_PIN)

#define	LED1_TOGGLE gpio_toggle(LED1_PIN)

Core temperature sensor configuration
Connection to the on-chip temperature sensor.
#define	CORETEMP_ADC ADC_LINE(0)

Macro Definition Documentation

◆ CONFIG_ZTIMER_USEC_ADJUST_SET

#define CONFIG_ZTIMER_USEC_ADJUST_SET (10)

Overhead for ztimer_set.

Definition at line 46 of file board.h.

◆ CONFIG_ZTIMER_USEC_ADJUST_SLEEP

#define CONFIG_ZTIMER_USEC_ADJUST_SLEEP (12)

Overhead for ztimer_sleep.

Definition at line 47 of file board.h.

◆ CONFIG_ZTIMER_USEC_BASE_FREQ

#define CONFIG_ZTIMER_USEC_BASE_FREQ (1000000UL)

Running at 1000 kHz.

Definition at line 44 of file board.h.

◆ CONFIG_ZTIMER_USEC_DEV

#define CONFIG_ZTIMER_USEC_DEV (TIMER_DEV(0))

Timer peripheral for ztimer.

Definition at line 43 of file board.h.

◆ CONFIG_ZTIMER_USEC_WIDTH

#define CONFIG_ZTIMER_USEC_WIDTH (32)

Running on a 32-bit timer.

Definition at line 45 of file board.h.

◆ CORETEMP_ADC

#define CORETEMP_ADC ADC_LINE(0)

Definition at line 98 of file board.h.

◆ LED0_OFF

#define LED0_OFF gpio_clear(LED0_PIN)

Definition at line 85 of file board.h.

◆ LED0_ON

#define LED0_ON gpio_set(LED0_PIN)

Definition at line 84 of file board.h.

◆ LED0_PIN

#define LED0_PIN LED0R_PIN

Definition at line 76 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE gpio_toggle(LED0_PIN)

Definition at line 86 of file board.h.

◆ LED0B_PIN

#define LED0B_PIN GPIO_PIN(PA, 14)

Definition at line 72 of file board.h.

◆ LED0G_PIN

#define LED0G_PIN GPIO_PIN(PA, 13)

Definition at line 71 of file board.h.

◆ LED0R_PIN

#define LED0R_PIN GPIO_PIN(PA, 12)

Definition at line 70 of file board.h.

◆ LED1_OFF

#define LED1_OFF gpio_clear(LED1_PIN)

Definition at line 88 of file board.h.

◆ LED1_ON

#define LED1_ON gpio_set(LED1_PIN)

Definition at line 87 of file board.h.

◆ LED1_PIN

#define LED1_PIN LED1R_PIN

Definition at line 77 of file board.h.

◆ LED1_TOGGLE

#define LED1_TOGGLE gpio_toggle(LED1_PIN)

Definition at line 89 of file board.h.

◆ LED1B_PIN

#define LED1B_PIN GPIO_PIN(PE, 12)

Definition at line 75 of file board.h.

◆ LED1G_PIN

#define LED1G_PIN GPIO_PIN(PF, 12)

Definition at line 74 of file board.h.

◆ LED1R_PIN

#define LED1R_PIN GPIO_PIN(PD, 6)

Definition at line 73 of file board.h.

◆ PB0_PIN

#define PB0_PIN GPIO_PIN(PD, 5)

Definition at line 62 of file board.h.

◆ PB1_PIN

#define PB1_PIN GPIO_PIN(PD, 8)

Definition at line 63 of file board.h.

◆ VCOM_EN_PIN

#define VCOM_EN_PIN GPIO_PIN(PA, 15)

Definition at line 55 of file board.h.