Board specific definitions for the E180-ZG120B-TB starter kit. More...

Detailed Description

Board specific definitions for the E180-ZG120B-TB starter kit.

Author: Hauke Petersen hauke.nosp@m..pet.nosp@m.ersen.nosp@m.@fu-.nosp@m.berli.nosp@m.n.de; Bas Stottelaar basst.nosp@m.otte.nosp@m.laar@.nosp@m.gmai.nosp@m.l.com

Definition in file board.h.

#include "cpu.h"
#include "periph_conf.h"
#include "periph/gpio.h"
#include "periph/spi.h"
#include "periph/timer.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

ztimer configuration
The timer runs at 250 kHz to increase accuracy, or at 32.768 kHz if LETIMER is used.
#define	CONFIG_ZTIMER_USEC_DEV (TIMER_DEV(0))
	Timer peripheral for ztimer.

#define	CONFIG_ZTIMER_USEC_BASE_FREQ (250000UL)
	Running at 250 kHz.

#define	CONFIG_ZTIMER_USEC_WIDTH (16)
	Running on a 16-bit timer.

#define	CONFIG_ZTIMER_USEC_ADJUST_SET (24)
	Overhead for ztimer_set.

#define	CONFIG_ZTIMER_USEC_ADJUST_SLEEP (24)
	Overhead for ztimer_sleep.

Push button pin definitions
#define	PB0_PIN GPIO_PIN(PD, 15)

#define	PB1_PIN GPIO_PIN(PD, 13)

#define	PB2_PIN GPIO_PIN(PB, 11)

LED pin definitions
#define	LED0_PIN GPIO_PIN(PF, 2)

#define	LED1_PIN GPIO_PIN(PF, 3)

Core temperature sensor configuration
Connection to the on-chip temperature sensor.
#define	CORETEMP_ADC ADC_LINE(0)

Macros for controlling the on-board LEDs
#define	LED0_ON gpio_set(LED0_PIN)

#define	LED0_OFF gpio_clear(LED0_PIN)

#define	LED0_TOGGLE gpio_toggle(LED0_PIN)

#define	LED1_ON gpio_set(LED1_PIN)

#define	LED1_OFF gpio_clear(LED1_PIN)

#define	LED1_TOGGLE gpio_toggle(LED1_PIN)

Macro Definition Documentation

◆ CONFIG_ZTIMER_USEC_ADJUST_SET

#define CONFIG_ZTIMER_USEC_ADJUST_SET (24)

Overhead for ztimer_set.

Definition at line 46 of file board.h.

◆ CONFIG_ZTIMER_USEC_ADJUST_SLEEP

#define CONFIG_ZTIMER_USEC_ADJUST_SLEEP (24)

Overhead for ztimer_sleep.

Definition at line 47 of file board.h.

◆ CONFIG_ZTIMER_USEC_BASE_FREQ

#define CONFIG_ZTIMER_USEC_BASE_FREQ (250000UL)

Running at 250 kHz.

Definition at line 44 of file board.h.

◆ CONFIG_ZTIMER_USEC_DEV

#define CONFIG_ZTIMER_USEC_DEV (TIMER_DEV(0))

Timer peripheral for ztimer.

Definition at line 43 of file board.h.

◆ CONFIG_ZTIMER_USEC_WIDTH

#define CONFIG_ZTIMER_USEC_WIDTH (16)

Running on a 16-bit timer.

Definition at line 45 of file board.h.

◆ CORETEMP_ADC

#define CORETEMP_ADC ADC_LINE(0)

Definition at line 74 of file board.h.

◆ LED0_OFF

#define LED0_OFF gpio_clear(LED0_PIN)

Definition at line 82 of file board.h.

◆ LED0_ON

#define LED0_ON gpio_set(LED0_PIN)

Definition at line 81 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(PF, 2)

Definition at line 64 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE gpio_toggle(LED0_PIN)

Definition at line 83 of file board.h.

◆ LED1_OFF

#define LED1_OFF gpio_clear(LED1_PIN)

Definition at line 85 of file board.h.

◆ LED1_ON

#define LED1_ON gpio_set(LED1_PIN)

Definition at line 84 of file board.h.

◆ LED1_PIN

#define LED1_PIN GPIO_PIN(PF, 3)

Definition at line 65 of file board.h.

◆ LED1_TOGGLE

#define LED1_TOGGLE gpio_toggle(LED1_PIN)

Definition at line 86 of file board.h.

◆ PB0_PIN

#define PB0_PIN GPIO_PIN(PD, 15)

Definition at line 55 of file board.h.

◆ PB1_PIN

#define PB1_PIN GPIO_PIN(PD, 13)

Definition at line 56 of file board.h.

◆ PB2_PIN

#define PB2_PIN GPIO_PIN(PB, 11)

Definition at line 57 of file board.h.