board.h

Go to the documentation of this file.

/*
 * Copyright (C) 2018 HAW Hamburg
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef BOARD_H
#define BOARD_H
 
#include "cpu.h"
#include "periph_conf.h"
#include "periph_cpu.h"
#include "periph/gpio.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
#define LED0_PIN            GPIO_PIN(PA, 27)
 
#define LED_PORT            PORT->Group[PA]
#define LED0_MASK           (1 << 27)
 
#define LED0_ON             (LED_PORT.OUTSET.reg = LED0_MASK)
#define LED0_OFF            (LED_PORT.OUTCLR.reg = LED0_MASK)
#define LED0_TOGGLE         (LED_PORT.OUTTGL.reg = LED0_MASK)
 
#define LED1_PIN            GPIO_PIN(PA, 28)
#define LED1_MASK           (1 << 28)
 
#define LED1_ON             (LED_PORT.OUTSET.reg = LED1_MASK)
#define LED1_OFF            (LED_PORT.OUTCLR.reg = LED1_MASK)
#define LED1_TOGGLE         (LED_PORT.OUTTGL.reg = LED1_MASK)
#define BTN0_PIN            GPIO_PIN(PA, 20)
#define BTN0_MODE           GPIO_IN_PU
#define XBEE1_EN_PORT           PORT->Group[PB]
#define XBEE1_EN_MASK           (1 << 3)
#define XBEE1_EN_MODE           GPIO_OUT
#define XBEE1_EN_PIN            GPIO_PIN(PB, 3)
 
#define XBEE1_ENABLE            (XBEE1_EN_PORT.OUTCLR.reg = XBEE1_EN_MASK)
#define XBEE1_DISABLE           (XBEE1_EN_PORT.OUTSET.reg = XBEE1_EN_MASK)
 
#define XBEE1_CS_PIN            GPIO_PIN(PA, 18)
 
#define XBEE1_INT_PIN           GPIO_PIN(PA, 21)
#define XBEE2_EN_PORT           PORT->Group[PB]
#define XBEE2_EN_MASK           (1 << 10)
#define XBEE2_EN_PIN            GPIO_PIN(PB, 10)
#define XBEE2_EN_MODE           GPIO_OUT
 
#define XBEE2_ENABLE            (XBEE2_EN_PORT.OUTCLR.reg = XBEE2_EN_MASK)
#define XBEE2_DISABLE           (XBEE2_EN_PORT.OUTSET.reg = XBEE2_EN_MASK)
 
#define XBEE2_CS_PIN            GPIO_PIN(PA, 14)
 
#define XBEE2_INT_PIN           GPIO_PIN(PA, 15)
#define I2C_EN_PORT           PORT->Group[PB]
#define I2C_EN_MASK           (1 << 11)
#define I2C_EN_PIN            GPIO_PIN(PB, 11)
#define I2C_EN_MODE           GPIO_OUT
 
#define I2C_ENABLE            (I2C_EN_PORT.OUTSET.reg = I2C_EN_MASK)
#define I2C_DISABLE           (I2C_EN_PORT.OUTCLR.reg = I2C_EN_MASK)
#define SX127X_PARAM_SPI                    (SPI_DEV(0))
 
#define SX127X_PARAM_SPI_NSS                XBEE1_CS_PIN        /* D23 */
 
#define SX127X_PARAM_RESET                  GPIO_UNDEF
 
#define SX127X_PARAM_DIO0                   XBEE1_INT_PIN       /* D24 */
 
#define SX127X_PARAM_DIO1                   GPIO_UNDEF
 
#define SX127X_PARAM_DIO2                   GPIO_UNDEF
 
#define SX127X_PARAM_DIO3                   GPIO_UNDEF
 
#define SX127X_PARAM_PASELECT               (SX127X_PA_BOOST)
#define WAIT_FOR_SPI_RESET (3000000UL)
 
#define HDC1000_PARAM_ADDR           (0x40)
 
#define TSL2561_PARAM_ADDR           TSL2561_ADDR_LOW
 
#define BMX280_PARAM_I2C_ADDR        (0x76)
 
#if defined(MODULE_MTD_SDCARD) || defined(DOXYGEN)
#define MTD_0 mtd_dev_get(0)
#endif /* MODULE_MTD_SDCARD || DOXYGEN */
 
#ifdef __cplusplus
}
#endif
 
#endif /* BOARD_H */