Board specific configuration for the PineTime. More...

Detailed Description

Board specific configuration for the PineTime.

Author: Kaspar Schleiser kaspa.nosp@m.r@sc.nosp@m.hleis.nosp@m.er.d.nosp@m.e

Definition in file board.h.

#include "cpu.h"
#include "board_common.h"

Include dependency graph for board.h:

GPIO pin defines
#define	LCD_RS GPIO_PIN(0, 18)

#define	LCD_DET GPIO_PIN(0, 9)

#define	LCD_CS GPIO_PIN(0, 25)

#define	LCD_RESET GPIO_PIN(0, 26)

#define	LCD_BACKLIGHT_LOW GPIO_PIN(0, 14)

#define	LCD_BACKLIGHT_MID GPIO_PIN(0, 22)

#define	LCD_BACKLIGHT_HIGH GPIO_PIN(0, 23)

#define	BUTTON0_ENABLE GPIO_PIN(0, 13)

#define	BUTTON0 GPIO_PIN(0, 15)

#define	VIBRATOR GPIO_PIN(0, 16)

#define	VCC33 GPIO_PIN(0, 24)

#define	POWER_PRESENCE GPIO_PIN(0, 19)

#define	CHARGING_ACTIVE GPIO_PIN(0, 12)

#define	BATTERY_ADC NRF52_AIN7

Backlight control defines, default uses LCD_BACKLIGHT_LOW values
#define	BACKLIGHT_MASK (1 << 14)

#define	BACKLIGHT_ON (NRF_P0->OUTCLR = BACKLIGHT_MASK)

#define	BACKLIGHT_OFF (NRF_P0->OUTSET = BACKLIGHT_MASK)

LCD configuration
#define	ILI9341_PARAM_SPI SPI_DEV(0)

#define	ILI9341_PARAM_SPI_CLK SPI_CLK_10MHZ

#define	ILI9341_PARAM_SPI_MODE SPI_MODE_3

#define	ILI9341_PARAM_CS LCD_CS

#define	ILI9341_PARAM_DCX LCD_RS

#define	ILI9341_PARAM_RST LCD_RESET

#define	ILI9341_PARAM_RGB 1

#define	ILI9341_PARAM_INVERTED 1

#define	ILI9341_PARAM_NUM_LINES 240U

#define	ILI9341_PARAM_ROTATION ILI9341_ROTATION_HORZ_FLIP

PineTime NOR flash hardware configuration
#define	PINETIME_NOR_PAGE_SIZE (256)

#define	PINETIME_NOR_PAGES_PER_SECTOR (16)

#define	PINETIME_NOR_SECTOR_COUNT (2048)

#define	PINETIME_NOR_FLAGS (SPI_NOR_F_SECT_4K \| SPI_NOR_F_SECT_32K)

#define	PINETIME_NOR_SPI_DEV SPI_DEV(0)

#define	PINETIME_NOR_SPI_CLK SPI_CLK_10MHZ

#define	PINETIME_NOR_SPI_CS GPIO_PIN(0, 5)

#define	PINETIME_NOR_SPI_MODE SPI_MODE_3

MTD configuration
#define	MTD_0 mtd_dev_get(0)

Touch screen configuration
#define	CST816S_PARAM_I2C_DEV I2C_DEV(0)

#define	CST816S_PARAM_I2C_ADDR (0x15)

#define	CST816S_PARAM_IRQ GPIO_PIN(0, 28)

#define	CST816S_PARAM_IRQ_FLANK GPIO_FALLING

#define	CST816S_PARAM_RESET GPIO_PIN(0, 10)

Macro Definition Documentation

◆ BACKLIGHT_MASK

#define BACKLIGHT_MASK (1 << 14)

Definition at line 59 of file board.h.

◆ BACKLIGHT_OFF

#define BACKLIGHT_OFF (NRF_P0->OUTSET = BACKLIGHT_MASK)

Definition at line 62 of file board.h.

◆ BACKLIGHT_ON

#define BACKLIGHT_ON (NRF_P0->OUTCLR = BACKLIGHT_MASK)

Definition at line 61 of file board.h.

◆ BATTERY_ADC

#define BATTERY_ADC NRF52_AIN7

Definition at line 51 of file board.h.

◆ BUTTON0

#define BUTTON0 GPIO_PIN(0, 15)

Definition at line 45 of file board.h.

◆ BUTTON0_ENABLE

#define BUTTON0_ENABLE GPIO_PIN(0, 13)

Definition at line 44 of file board.h.

◆ CHARGING_ACTIVE

#define CHARGING_ACTIVE GPIO_PIN(0, 12)

Definition at line 50 of file board.h.

◆ CST816S_PARAM_I2C_ADDR

#define CST816S_PARAM_I2C_ADDR (0x15)

Definition at line 107 of file board.h.

◆ CST816S_PARAM_I2C_DEV

#define CST816S_PARAM_I2C_DEV I2C_DEV(0)

Definition at line 106 of file board.h.

◆ CST816S_PARAM_IRQ

#define CST816S_PARAM_IRQ GPIO_PIN(0, 28)

Definition at line 108 of file board.h.

◆ CST816S_PARAM_IRQ_FLANK

#define CST816S_PARAM_IRQ_FLANK GPIO_FALLING

Definition at line 109 of file board.h.

◆ CST816S_PARAM_RESET

#define CST816S_PARAM_RESET GPIO_PIN(0, 10)

Definition at line 110 of file board.h.

◆ ILI9341_PARAM_CS

#define ILI9341_PARAM_CS LCD_CS

Definition at line 72 of file board.h.

◆ ILI9341_PARAM_DCX

#define ILI9341_PARAM_DCX LCD_RS

Definition at line 73 of file board.h.

◆ ILI9341_PARAM_INVERTED

#define ILI9341_PARAM_INVERTED 1

Definition at line 76 of file board.h.

◆ ILI9341_PARAM_NUM_LINES

#define ILI9341_PARAM_NUM_LINES 240U

Definition at line 77 of file board.h.

◆ ILI9341_PARAM_RGB

#define ILI9341_PARAM_RGB 1

Definition at line 75 of file board.h.

◆ ILI9341_PARAM_ROTATION

#define ILI9341_PARAM_ROTATION ILI9341_ROTATION_HORZ_FLIP

Definition at line 78 of file board.h.

◆ ILI9341_PARAM_RST

#define ILI9341_PARAM_RST LCD_RESET

Definition at line 74 of file board.h.

◆ ILI9341_PARAM_SPI

#define ILI9341_PARAM_SPI SPI_DEV(0)

Definition at line 69 of file board.h.

◆ ILI9341_PARAM_SPI_CLK

#define ILI9341_PARAM_SPI_CLK SPI_CLK_10MHZ

Definition at line 70 of file board.h.

◆ ILI9341_PARAM_SPI_MODE

#define ILI9341_PARAM_SPI_MODE SPI_MODE_3

Definition at line 71 of file board.h.

◆ LCD_BACKLIGHT_HIGH

#define LCD_BACKLIGHT_HIGH GPIO_PIN(0, 23)

Definition at line 42 of file board.h.

◆ LCD_BACKLIGHT_LOW

#define LCD_BACKLIGHT_LOW GPIO_PIN(0, 14)

Definition at line 40 of file board.h.

◆ LCD_BACKLIGHT_MID

#define LCD_BACKLIGHT_MID GPIO_PIN(0, 22)

Definition at line 41 of file board.h.

◆ LCD_CS

#define LCD_CS GPIO_PIN(0, 25)

Definition at line 37 of file board.h.

◆ LCD_DET

#define LCD_DET GPIO_PIN(0, 9)

Definition at line 36 of file board.h.

◆ LCD_RESET

#define LCD_RESET GPIO_PIN(0, 26)

Definition at line 38 of file board.h.

◆ LCD_RS

#define LCD_RS GPIO_PIN(0, 18)

Definition at line 35 of file board.h.

◆ MTD_0

#define MTD_0 mtd_dev_get(0)

Definition at line 99 of file board.h.

◆ PINETIME_NOR_FLAGS

#define PINETIME_NOR_FLAGS (SPI_NOR_F_SECT_4K | SPI_NOR_F_SECT_32K)

Definition at line 88 of file board.h.

◆ PINETIME_NOR_PAGE_SIZE

#define PINETIME_NOR_PAGE_SIZE (256)

Definition at line 85 of file board.h.

◆ PINETIME_NOR_PAGES_PER_SECTOR

#define PINETIME_NOR_PAGES_PER_SECTOR (16)

Definition at line 86 of file board.h.

◆ PINETIME_NOR_SECTOR_COUNT

#define PINETIME_NOR_SECTOR_COUNT (2048)

Definition at line 87 of file board.h.

◆ PINETIME_NOR_SPI_CLK

#define PINETIME_NOR_SPI_CLK SPI_CLK_10MHZ

Definition at line 90 of file board.h.

◆ PINETIME_NOR_SPI_CS

#define PINETIME_NOR_SPI_CS GPIO_PIN(0, 5)

Definition at line 91 of file board.h.

◆ PINETIME_NOR_SPI_DEV

#define PINETIME_NOR_SPI_DEV SPI_DEV(0)

Definition at line 89 of file board.h.

◆ PINETIME_NOR_SPI_MODE

#define PINETIME_NOR_SPI_MODE SPI_MODE_3

Definition at line 92 of file board.h.

◆ POWER_PRESENCE

#define POWER_PRESENCE GPIO_PIN(0, 19)

Definition at line 49 of file board.h.

◆ VCC33

#define VCC33 GPIO_PIN(0, 24)

Definition at line 48 of file board.h.

◆ VIBRATOR

#define VIBRATOR GPIO_PIN(0, 16)

Definition at line 46 of file board.h.