Loading...
Searching...
No Matches
gpio_params.h
Go to the documentation of this file.
1/*
2 * Copyright (C) 2018 Eistec AB
3 * Copyright (C) 2018 HAW Hamburg
4 *
5 * This file is subject to the terms and conditions of the GNU Lesser
6 * General Public License v2.1. See the file LICENSE in the top level
7 * directory for more details.
8 */
9
21#ifndef GPIO_PARAMS_H
22#define GPIO_PARAMS_H
23
24#include "board.h"
25#include "saul/periph.h"
26
27#ifdef __cplusplus
28extern "C" {
29#endif
30
35{
36 /* There are 2 user controlled LEDs on board. An orange LED (D2) and an
37 * RGB LED (D10). The RGB LED is configured with 3 LEDx macros. */
38#ifdef LED0_PIN
39 {
40 .name = "D2 (Orange)",
41 .pin = LED0_PIN,
42 .mode = GPIO_OUT,
44 },
45#endif /* LED0_PIN */
46#ifdef LED1_PIN
47 {
48 .name = "D10 RGB (Red)",
49 .pin = LED1_PIN,
50 .mode = GPIO_OUT,
52 },
53#endif /* LED1_PIN */
54#ifdef LED2_PIN
55 {
56 .name = "D10 RGB (Green)",
57 .pin = LED2_PIN,
58 .mode = GPIO_OUT,
60 },
61#endif /* LED1_PIN */
62#ifdef LED3_PIN
63 {
64 .name = "D10 RGB (Blue)",
65 .pin = LED3_PIN,
66 .mode = GPIO_OUT,
68 },
69#endif /* LED1_PIN */
70 {
71 .name = "S2 (Button)",
72 .pin = BTN0_PIN,
73 .mode = BTN0_MODE,
74 .flags = (SAUL_GPIO_INVERTED),
75 },
76};
77
78#ifdef __cplusplus
79}
80#endif
81
82#endif /* GPIO_PARAMS_H */
static const saul_gpio_params_t saul_gpio_params[]
LED configuration.
Definition gpio_params.h:33
#define LED1_PIN
TX LED yellow.
Definition board.h:35
#define LED2_PIN
RX LED yellow.
Definition board.h:36
@ GPIO_OUT
select GPIO MASK as output
Definition periph_cpu.h:165
Parameter definitions for mapping peripherals directly to SAUL.
@ SAUL_GPIO_INIT_CLEAR
set pin inactive after init
Definition periph.h:44
@ SAUL_GPIO_INVERTED
pin is used as inverted
Definition periph.h:43
Direct mapped GPIO configuration values.
Definition periph.h:51
const char * name
name of the device connected to this pin
Definition periph.h:52
Board specific definitions for the Zigduino board.