NXP USB-KW41Z Board

Support for the USB-KW41Z. More...

Detailed Description

Support for the USB-KW41Z.

Overview

The NXP USB-KW41Z board a development platform with a convenient USB dongle form factor.

The USB-KW41Z provides a radio device with Bluetooth Low Energy and/or IEEE 802.15.4.

Flash the board

To flash the board using OpenOCD, it needs to be changed from the factory programmed sniffer application to an OpenSDA application used for flashing and debugging.

1. Follow the [Quick Start Guide at NXP.com][quick-start-guide]:
   • click on "2. Get Software" -> "Choose a Development Path: USB-KW41Z Development Platform"
   • scroll down to "2.3 Load Segger JLink OpenSDA App"
   • follow the instructions
2. Use BOARD=usb-kw41z with the make command.
   Example with hello-world application:

   make BOARD=usb-kw41z -C examples/hello-world flash term

Files
file	adc_params.h
	Board specific configuration of direct mapped ADC.
file	board.h
	Board specific definitions for the USB-KW41Z.
file	gpio_params.h
	Board specific configuration of direct mapped GPIOs.
file	periph_conf.h