STM32 Nucleo-G070RB

Support for the STM32 Nucleo-G070RB. More...

Detailed Description

Support for the STM32 Nucleo-G070RB.

Overview

The Nucleo-G070RB is a board from ST's Nucleo family supporting a ARM Cortex-M0+ STM32G070RB microcontroller with 36KiB of RAM and 128KiB of Flash.

Pinout

Pinout for the nucleo-g070rg (from STM board manual)

MCU

MCU	STM32G070RB
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	36KiB
Flash	128KiB
Frequency	up to 64 MHz
Timers	11 (2x watchdog, 1 SysTick, 8x 16-bit)
ADCs	1x 12 bit (up to 16 channels)
UARTs	4 USARTs
I2Cs	2
SPIs	2
RTC	1
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-g070rb PROGRAMMER=cpy2remed flash

Note

This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates could be found on this STM webpage.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-g070rb board.